Standard Features
• Steel Casters
• Water cooled refrigeration
• Two adjustable stainless steel wire rod shelves
• Independent high-low temperature limit controller
• Two 4-inch chamber access ports

Controller
• 5.7" Touchscreen Program Logic Controller
• User Friendly Interface
• Part temperature control capability is standard
• Ethernet Communications
• Webserver allows for remote monitoring & operation
• Data Logging

Options
• GPIB communications
• Self-contained air-cooled refrigeration
• Remote air-cooled refrigeration condenser
• Larger conditioning equipment for larger loads
• Alternative voltage requirement (380/460 Volt is standard)
• Extra data logging inputs
• Purge System

MIL STD Performance
Capable of meeting MIL STD 883 Method 1010.8, Test Condition B with a 100 pound (45 Kg) load of 16 DIP ceramic IC chips, and MIL STD 883 Method 1010.8, Test Condition C with a 50 pound (22.5Kg) load of 16 DIP ceramic IC chips. Product recovery within 15 minutes.

Fast Change Rate
Using a Patented thermal storage system, our chambers can achieve air temperature change rates of more than 60ºC per minute depending on the temperatures.

Part Temperature Control
Provides for faster test specimen change rates.

Temperature Ramping
Linear ramping capability of temperature provides for control of maximum change rates.

Time and Additional Energy Savings
These chambers do not require a periodic defrost cycle so an immediate time and energy savings is realized.

Simplicity and Increased Reliability
The chamber's test workspace is a single zone. The device under test does not move, saving time and eliminating the need for air dampers or a basket transfer system and the associated control systems.

The refrigeration systems use electronic control valves for enhanced performance and improved reliability.

Compact Footprint Saves Space in Your Lab
This self-contained chamber has a small footprint occupying just sixteen square feet of floor space.

Noise Reduction
Our chambers use only scroll-type compressors which are inherently quieter than a piston compressor.

Interior Workspace Dimensions
12 Cubic - 24" Wide X 32" Deep X 27" High
(340 Liter - 61 cm X 81 cm X 69 cm)

Exterior Dimensions
36" Wide X 64" Deep X 77" High
(92 cm X 163 cm X 195 cm)

Temperature
-75°C to +200°C

Electrical
380/460 Volts
50/60 Hertz 3 Phase
 

Specifications subject to change without notice.
US Patent Numbers 66161391 and US6463055B1
 

12 Cubic Foot Specifications PDF
Chamber Overview PDF